Radium Engineering Fuel Surge Tank Wiring Harness - Flying Leads W/ Connector *External Single Pump*
INTERNAL AND EXTERNAL BULKHEADS
- External harness wires use 24" long 10AWG TXL insulated wires. Internal harness use twin 16 AWG ETFE insulated wires.
- 4-Pin metal shell bulkheads and flying lead connectors are available and can be referenced by the part numbers.
EXTERNAL ELECTRICAL BULKHEAD CONNECTORS
- These bulkheads can be used for rebuilding a damaged connector or for DIY installation.
PANEL REQUIREMENTS
- All panels must be 0.06-0.18 inches thick. See the drawing below for cutouts for each bulkhead connector.
- A gasket is included on the large connector and the small connector includes an O-ring for sealing against panel surface.
PINOUTS
- If wiring a connector to a Radium Engineering internal harness, the pinouts are below.