AEM’s X-Series OBDII gauge (PN 30-0311) puts multiple channels of data at your fingertips by reading the CAN bus stream of your vehicle’s OBD port and transmitting those channels to the gauge display. It reads Diagnostic Trouble Codes (DTCs) and gives you the ability to clear codes. Wiring is as simple as connecting the gauge to your vehicle’s OBDII port using the supplied connector! Because the X-Series OBDII gauge reads OBDII parameters transmitted through a vehicle’s CAN datastream, it will only work on 2008+ model year vehicles.
EASY TO USE
Use the ‘Page’ button on the gauge face to scroll through available channels of data transmitted through the OBD port. Possible channels are listed below and may include IAT, EGT, RPM, Ethanol %, MAF, Fuel Pressure, Manifold Pressure, Boost Pressure, TPS, Vehicle Speed, Lambda and more (channel availability is ultimately dependent upon what channels are programmed to transmit by the vehicle manufacturer).
READ & CLEAR TROUBLE CODES
The ‘DTC’ button tells the gauge to scan for trouble codes and will report any stored DTCs, allowing you to look them up and determine the course of repair. This button also allows users to cleat DTCs once the problem is resolved.
The X-Series AEM OBD2 Gauge (PN 30-0311) has a bright four-digit LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. X-Series Gauges come with a black bezel and faceplate, and an optional silver bezel/white faceplate accessory kit is available (PN 30-0311-ACC, sold separately).
Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.
- Reads data channels from 2008+ MY vehicles through the OBDII port!
- Reads and clears Diagnostic Trouble Codes (DTCs)!
- Easy to install and wire –power and data come from OBDII port using supplied connector
- Slim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!
- 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods
- Positive locking connector provides secure connection
- Auto dimming sensor delivers ideal display brightness
- 24 green outer LEDs for quick reference to engine parameter
- Black bezel and black faceplate included (silver bezel/white faceplate sold separately, PN 30-0311-ACC)
- Compatible with vehicle/system voltages up to 16V
Products that have an availability of "In Stock" are shipped same day or the next if ordered before 2 PM EST. Products that have an availability of "Manufacture Ship" are products that ship directly from the manufacture and usually ship within 2-3 business days. At times these items may take longer to ship. By contacting us via our contact form here we can give you an estimate on shipment.
No orders are shipped on weekends or holidays. If we are experiencing a high volume of orders, shipments may be delayed by a few days. If there will be a significant delay in shipment of your order, we will contact you via email or telephone. Please allow additional days in transit for delivery. Please make sure when submitting an order that your address is correct.Free Shipping
Free shipping is available within the lower 48 states for some products. Simply select the free shipping option during checkout, if it's available. (This does not apply to large items or items where shipping quotes are required (ie: bumpers, seats, GT Wings, and so on). Individual items with Free Shipping will be shipped by the carrier of our choice to a single address within the continental United States. This offer excludes shipments going to Alaska, Hawaii, Military Boxes, and items too large to ship via a standard carrier.Duties and Customs
When shipping internationally Complex Seven is not responsible for Duties and customs fee's. These fees must be paid directly to the courier as we do not impose them.Address Restrictions
The billing and shipping address must be the same. If it is not we will call or email to verify the inconsistent addresses. This will put a hold on processing your order. If no response from either communication channels, your order will be cancelled and refunded in full.
We don’t ship to PO Boxes.Returns
All returns are subject to re-stocking fee up to 20%. The restocking fee covers the cost of our order processing and restocking process. Items you wish to return MUST be approved prior to your return. Please click here to start the return process. All return inquiries must be sent to us within 30 days of receiving your order. Approved returns MUST be sent back to us within 15 days of receiving your return approval. Returned items must be in brand new condition or, unused condition. Shipping, handling, and transaction fees are non-refundable.
No returns, cancellations, or refunds are allowed on special order items. Once items have been returned to us, and the condition has been inspected and approved, a refund will be issued. Approved refunds are issued within 2-3 business days. Also note that each bank process returns differently, so it might not appear in your account immediately. Exchanges
Please click here to initiate an exchange. Exchanges are subject to second shipping charges unless there was a mistake made on the order. If a mistake was made by Complex Seven Industries, we will provide a return shipping label for you to use to make the exchange as seamless as possible.